Kitchen fitters in Blackpool, Lancashire
Kitchen sink fitters in Blackpool: get a sink or tap replaced, with a free quote
Kitchen sink fitting covers swapping a worn sink, fitting a new tap, or cutting the worktop for a sink of a different shape. Fill in the short form with what you have now and what you want, then pick a time for the call back. A kitchen fitter from the area calls at the time you picked and quotes for free.
- Stainless steel, composite and ceramic sinks fitted
- Mixer taps changed at the same visit
- Worktop cut-outs made or altered for a new shape
- Free to ask, with UK guide prices on this page
A worn sink and tap are easy to put up with until they leak
A kitchen sink is used many times a day. It gets the roasting tin, the muddy boots and the paint brushes.
After enough of that, it shows. The steel is dull and scratched. The sealant round the rim has gone black. The tap turns with the lever because the nut beneath has worked loose, and there is a drip you have stopped hearing.
A drip that lands in the cupboard below is the one to worry about. You will not see it until the back panel has gone soft and the bleach bottle is stood in a puddle.
How your quote is arranged
Tell us about the kitchen
Fill in your name, phone number and which part of Blackpool you are in. Then say what you have: where the kitchen came from, roughly how many units, and what sort of worktop.
A local kitchen fitter phones you
You get a call at the time of day you chose. Expect a few questions about the room, the pipes and the cooker. For a full fit, the fitter will usually want to call round and see it.
Get your price and decide
You are given a price for fitting. Have it put in writing, sleep on it, and say yes only if it suits you. Asking will not cost you a penny.
Like for like, or something different
The simplest job is a straight swap. The new sink is the same size and type as the old, so it drops into the same hole in the worktop and joins the same pipes. A UK cost guide says these are usually the quickest, as the existing pipework and waste can often be reused.
A different shape is more involved. A bigger bowl may mean the cut-out is made larger. A smaller one will not cover the old hole at all, and that points to a new worktop.
An undermount sink is fixed beneath the worktop with the cut edge on show. It suits stone and solid wood. It cannot be used with ordinary laminate, because the exposed chipboard edge would soak up water.
Typical cost of a new kitchen sink
Two published guides give figures for sink work. They are set out here.
| Job | UK guide price |
|---|---|
| Like-for-like sink replacement, sink and labour | £150 to £330typical about £275 |
| Sink installation, basic to premium style | £100 to £300 |
Typical UK guide prices read from published UK cost guides. These figures are not quotes. The typical figure on the first line is the UK cost guide's average for sink and tap work. Moving a sink to a new position costs much more than either range.
The UK cost guide puts a stainless steel sink at £70 to £180 to buy, composite at £100 to £250 and ceramic at £120 to £300. Taps are £30 to £250 on top, from a basic mixer up to a boiling water tap.
Who fits a kitchen sink?
It is a job that sits between two trades. Cutting the worktop and bedding the sink in is kitchen fitting. Joining the taps to the water and the bowl to the waste is plumbing.
Plenty of kitchen fitters do both for a simple swap. Some stick to the woodwork and bring a plumber in for the pipes. When you get your quote, ask who is making the water connections.
If the sink is being moved to another wall, new hot and cold feeds and a new waste run are needed, and the waste must slope the right way all the way to the drain. That is plumber's work. So is anything touching a boiler. And if a gas hob has to come out for the worktop to be cut, only a Gas Safe registered engineer may disconnect it.
Sinks in Blackpool flats and terraces
In an old terrace the kitchen sink is often under the back window, with the waste going straight out through the wall to a gully in the yard. That can make a swap easy.
Flats made out of former guest houses are less tidy. The kitchen may be a long way from the main stack, with the waste pipe run round the skirting to reach it. Sinks on those long runs can be slow to empty. Tell the fitter if yours gurgles or drains slowly now. A new sink will not cure a waste pipe with too little fall, but the pipe can often be put right while the cupboard is empty.
While the sink is out, look at the base unit. If the floor of it is swollen, see kitchen unit fitting. And if the worktop round the sink has lifted, it makes sense to do the worktop and sink together.
Kitchen fitting services in Blackpool
- Full kitchen fittingYour whole kitchen fitted, from rip-out to the last plinth.
- Flat-pack kitchen fittingDIY shed and online flat-pack kitchens built and fitted.
- Worktop fittingLaminate, wood and stone worktops cut, joined and sealed.
- Replacement kitchen doorsNew doors and drawer fronts on your existing cupboards.
- Small kitchens and flatsGalley kitchens, flats and tight back rooms fitted to the inch.
- Kitchen units and rip-outsCupboards and cabinets fitted, old kitchens taken out.
Parts of Blackpool and the Fylde coast covered
Kitchen fitting right across Blackpool, and in the towns a short drive up or down the coast.
- Town centre and Central Blackpool
- North Shore
- South Shore
- Bispham and Norbreck
- Anchorsholme
- Layton
- Grange Park
- Marton
- Squires Gate and Starr Gate
- Cleveleys and Thornton
- Poulton-le-Fylde
- Fleetwood
- Lytham St Annes
- Staining
Points to know first
- There is no fee at any stage. There is no fee for sending the form and no fee for the quote. If the price is not for you, say so and that is the end of it.
- The form is short on purpose. Four details: your name, a number, your area and the job. Nobody asks for your email address or your door number.
- Prices here are not plucked from the air. Each figure on this site is a typical UK guide price copied from a published cost guide. Your own quote will depend on your own kitchen.
- Your number goes towards this one job and nothing else. It is there so a kitchen fitter can ring you about your kitchen. It is not sold and not added to any mailing list.
Common questions
How long does it take to change a kitchen sink?
A UK cost guide says most straightforward jobs take about one to four hours. Altering the worktop cut-out, changing pipework or fitting an undermount sink takes longer.
Can I change just the tap?
Yes. A tap swap on its own is a short job as long as the isolating valves work and the fixing nut can be reached. Say in the form if the tap is a single lever mixer or two separate taps.
Should the sink be changed when the worktop is?
It is the sensible moment. The cut-out in a new worktop is made for one particular sink, so swapping to a different shape afterwards is hard. A UK worktop guide makes the same point.
Stop the drip before it costs you a cupboard
Water under a sink does slow, quiet damage. Chipboard swells, the cabinet floor gives way, and damp gets into the wall behind. A loose tap or failed seal is a small job this month and a new base unit if it is left.
Describe the sink you have and the one you want, and name your part of Blackpool. You will not be billed for the quote.